POWERCAP Fixed LV Power Factor Correction Capacitors

POWERCAP Fixed LV Power Factor Correction Capacitors

 
I. Standard Capacitor Features:
Liquid type cells (non-PCB biodegradable fluid)
Self healing, low loss metallized polypropylene dielectric film
3 phase construction with 3 phase pressure interrupter system
UL listed pressure activated circuit interrupter rated for 10,000 AFC
Discharge resistors to reduce residual voltage to less than 50V in one minute
Operating temperature of -40°F (-40°C) to 115°F (46°C)
20 year continuous duty design life
UL and CSA listed

II. Powercap Ratings:
240V, up to 200 KVAR, 3 ph.
480V, up to 400 KVAR, 3 ph.
600V, up to 400 KVAR, 3 ph.

III. Construction:
Code gage steel, baked powder paint.
Provision for floor and/or wall mounting.
Standard enclosure is Nema 1 and 12.
Easy access to line and ground lugs through an ‘L’ shaped cover.

IV. Other Options or Special Features Available:
PSD dry type cells (dielectric wax)
Current limiting fuses with 100,000 to 200,000 AIC
Blown fuse pilot lights in either “on all the time” or “off all the time” configurations
Contactor mains
Iron core chokes, reactor for harmonic filtering
Single phase
Nema 3 and 4X enclosure
Special ratings for frequency, voltage or KVAR
 
 
View Brochure

Contact us about this product