Products

POWERCAP Fixed LV Power Factor Correction CapacitorsContact us about this product

POWERCAP Fixed LV Power Factor Correction Capacitors

Manufactured by: Power Survey International

 
I. Standard Capacitor Features:
Liquid type cells (non-PCB biodegradable fluid)
Self healing, low loss metallized polypropylene dielectric film
3 phase construction with 3 phase pressure interrupter system
UL listed pressure activated circuit interrupter rated for 10,000 AFC
Discharge resistors to reduce residual voltage to less than 50V in one minute
Operating temperature of -40°F (-40°C) to 115°F (46°C)
20 year continuous duty design life
UL and CSA listed

II. Powercap Ratings:
240V, up to 200 KVAR, 3 ph.
480V, up to 400 KVAR, 3 ph.
600V, up to 400 KVAR, 3 ph.

III. Construction:
Code gage steel, baked powder paint.
Provision for floor and/or wall mounting.
Standard enclosure is Nema 1 and 12.
Easy access to line and ground lugs through an ‘L’ shaped cover.

IV. Other Options or Special Features Available:
PSD dry type cells (dielectric wax)
Current limiting fuses with 100,000 to 200,000 AIC
Blown fuse pilot lights in either “on all the time” or “off all the time” configurations
Contactor mains
Iron core chokes, reactor for harmonic filtering
Single phase
Nema 3 and 4X enclosure
Special ratings for frequency, voltage or KVAR
 
 
View Brochure

Liquid Level SensorsContact us about this product

Liquid Level Sensors

Manufactured by: OleumTech

OleumTech offers multiple liquid level solutions:

  • Magnetostrictive  – OleumTech WT Series Wireless Liquid Level Transmitter – Magnetostrictive is a self-contained, battery-powered liquid measurement solution made especially for the remote, rugged environments without access to a power line. This device is part of the OleumTech Wireless Sensor Network. More Information
  • Hard wired Modbus/Level Master Magnetostrictive – The OleumTech Hardwired “H-Series” Liquid Level Sensor is ideal for installation into existing infrastructure where conduit or wiring is already in place. We offer both Modbus and Level Master ASCII versions. Either Rigid, Flexible, or Ultra-Flex probe can be attached to the sensor. This level sensor takes field-proven magnetostrictive sensing technology and packages it in an exclusive design for greater reliability, easier installation and mounting. It is ideal for liquid level measurement, interface level and temperature in a variety of liquid media found in virtually all tank sizes. More Information
  • Resistive – OleumTech WT Series Wireless Liquid Level Transmitter – Resistive is a self-contained, battery-powered liquid measurement solution made especially for the remote, rugged environments without access to a power line. This device is part of the OleumTech Wireless Sensor Network.  More Information
  • Hydrostatic   – OleumTech WT Series Wireless Liquid Level Transmitter – Hydrostatic is a self-contained, battery-powered liquid measurement solution made especially for the remote, rugged environments without access to a power line. This device is part of the OleumTech Wireless Sensor Network. More Information
  • Ultrasonix – OleumTech WT Series Wireless Liquid Level Transmitter – Ultrasonic is a self-contained, battery-powered liquid measurement solution is non-contact and has no moving parts and is made especially for the remote, rugged environments without access to a power line.  More Information
  • High level switch – OleumTech WT Series Wireless High Level Switch Transmitter – Top Mount is a self-contained, battery-powered spill/overflow prevention solution made especially for the remote, rugged environments without access to a power line. This device is part of the OleumTech Wireless Sensor Network.  More Information
Wireless TransmittersContact us about this product

Wireless Transmitters

Manufactured by: OleumTech

We offer a comprehensive line of transmitters for wirelessly monitoring various conditions including liquid level, high level, pressure, flow, temperature, and triggering alarm.  Our Wireless Transmitters are self-contained and battery-powered, eliminating the need for external power.  Additionally, these devices are intrinsically safe for use in Class I, Division 1 locations, while providing seamless integration with third-party devices and sensors. The new WT series products feature a local LCD display. This feature enables configuring device on-site without cables and allows instant readings without connecting to a PC.

More Information – WT Series

More Information – WT Series with local LCD Display